Zero Cold-Weather Lock Failures.

EAP Smart Locks solution for EV charging infrastructure

THE PROBLEM WE SOLVE

Battery-powered hatch lock fails — engineer can’t access
Cable lock fails — locks driver’s cable
Each incident costs up to €500 with revenue loss

HOW DATWYLER SOLVES THIS

No battery means no cold-sensitive component
Charge point stays accessible to engineers
Network uptime metrics protected

CUSTOMER EXPERIENCE

EV DRIVER

January at −18°C: Plug in cable, tap NFC — lock engages instantly. Cable protected from theft. Tap phone — releases instantly.

NETWORK OPERATOR

Engineer at −28°C: NFC opens hatch instantly. €200+ per avoided failure × 500 sites equals over €100,000 annual saving.

OUR KEY APPLICATIONS

Common Questions About EAP Smart Locks

Key Answers for decision-makers evaluating battery-free access control technology.

Datwyler smart locks use an advanced polymer actuator that converts a small electrical charge into mechanical movement. The energy is harvested directly from the NFC signal emitted by your smartphone or card during the tap. A single NFC transaction provides more than enough power — with no battery or wired supply required.

Datwyler smart locks open in under half a second from the NFC tap — comparable to a traditional mechanical key action. Opening time can vary depending on the smartphone model used.

Datwyler smart locks are designed for reliable operation from −30°C to 80°C (−22°F to 176°F). This covers outdoor ski resorts, arctic storage facilities, hot EV charging stations and direct-sunlight installations. Battery-powered alternatives typically fail below −10°C.

No. Datwyler smart locks require no special hardware intervention over its lifetime (such as lubrication or part replacements).

Datwyler smart locks deliver approximately 80% lower cost over 10 years. Battery-powered locks typically incur €15–€25 per lock per year in parts and labour, plus €85–€300 per emergency call-out. A 100-lock deployment with Datwyler smart locks eliminates €15,000–€25,000 in routine costs and €5,000–€15,000 in emergency costs over 10 years.

Yes. Datwyler smart locks have been designed to fit within industry-standard door preparation sizes. No wiring or power supply infrastructure is required. Contact us to discuss how to directly drop-in retrofit into your existing door hardware without any structural modification to the door, frame, or surrounding building fabric.

Datwyler smart locks are compatible with all standard NFC credential formats, including NFC-enabled smartphones. The technology is compatible with the broad range of NFC credential management platforms used in hospitality, building management and enterprise access control. Datwyler smart locks can also be compatible with RFID credential formats (e.g. RFID access cards) for situations where NFC-enabled smartphones cannot be used, but this version involves batteries for the energy supply, thereby limiting the temperature range.

Datwyler smart locks are being evaluated across self-storage, hotels and hospitality, ski resorts and alpine facilities, multifamily residential and build-to-rent, EV charging infrastructure, IT and critical facilities, smart lockers and cabinet systems, and bike locks and micro-mobility infrastructure.